pdf
Printer Friendly Version
(199 KB)
View NFPA Testing Data
View Miami-Dade NOA
NEMA Test Results
| Description | Test ID | NEMA Requirements | Class A | Class B |
| Light Resistance | 3.3 | Slight Effect | Slight Effect | Slight Effect |
| Cleanability | 3.4 | Cleanability < 20 | 10 | 10 |
| Stain Resistance | 3.4 | Unaffected By Reagents (1-10) Moderate (11-15) |
No Effect Moderate Effect |
No Effect Moderate Effect |
| Resistance to Boiling Water | 3.5 | No Effect | No Effect | No Effect |
| Resistance to High Temperature | 3.6 | Slight Effect | No Effect | No Effect |
| Ball Drop Impact Resistance: | 3.8 | 75" | 90"+ | 90"+ |
| Dimensional Change: Length Dimensional Change: Width |
3.11 | 0.3% Maximum 0.7% Maximum |
0.25% 0.50% |
0.25% 0.50% |
| Wear Resistance: | 3.13 | 400 Cycle Minimum | 700 Cycle | 700 Cycle |
Mechanical Properties
| Property | Direction | Class A | Class B |
| Flexural Strength ASTM D-790 (PSI) | Machine Direction Cross Direction |
18,000 12,000 |
20,000 16,000 |
| Flexural Modulus ASTM D-790 (PSI) | Machine Direction Cross Direction |
1.5 x 106 1.1 x 106 |
1.9 x 106 1.3 x 106 |
| Tensile Modulus ASTM D-638 (PSI) | Machine Direction Cross Direction |
15,000 10,000 |
18,000 12,000 |
Fire Test Data
| Description | Information | Class A | Class B |
| Flame Spread Index - ASTM E-84 (BLDG) | 0 | 60 | |
| Smoke Developed Values - ASTM E-84 (BLDG) | Class B is considered to be the Standard Product. | 10 | 200 |
| NFPA 285 | Compliant |
Physical Characteristics
| Weight Per Unit Area | |||
| Thickness | 0.156" | 0.250" | 0.500" |
| Density PCF | 86 ± 3 | 86 ± 3 | 86 ± 3 |
| Lbs/ft2 | 1.12 ± 0.04 | 1.79 ± 0.06 | 3.58 ± 0.13 |
| Kg/m2 | 5.47 ± 0.20 | 8.74 ± 0.29 | 17.47 ± 0.64 |
Weathering Resistance
| Description | Test Method | Requirements (3000 Hr) |
| Grey Scale | DIN EN 438-2 29 | 3-4 |
| Appearance | DIN EN 438-2 29 | 4 |
Manufacturing Tolerance
| Measurement | Tolerance (in) |
| Thickness (.156 to .375) | ± .020 |
| Thickness (above .375 to 1.000) | ± .030 |
| CNC Shaped size (Length -Width) | ± .020 |
| Drill Diameter | ± .003 |
| Drill Depth | ± .020 |
| CNC Hole to hole | ± .020 |
| CNC Hole to Edge (1 Oper) | ± .020 |
| CNC Hole to Edge (2 Oper) | ± .030 |
| Routing - (Slots Width and Length) | ± .015 |
| Routing - (Slots Depth) | ± .020 |
Approvals
| Description | Information |
| Miami Dade / Notice of Acceptance | Compliant |
| Florida Product Approval / Validated | FL27934 |