Material Receipt

• Verify condition of package.
• All product is quoted FCA factory. If there is visible damage, it is the responsibility of the buyer to file a freight claim for any damage within 24 hours of receipt.

Packaging and Moving

• Keep panels on pallets.
• Fasten panels using straps within vehicle.
• Protect edges with packing material such as: corners/blanket.

Handling of Exterior Panels

• Do not scratch the UV protective surface during handling, machining and installation.
• Panels are shipped with protective foam dividers or Clear Peel Coat between each panel.
• Always use the foam dividers or ensure Peel Coat is intact when stacking panels.
• Keep foam dividers or Peel Coat in place until ready to install.

Storage

• Keep load stored within outer wrap until use.
• Keep panels dry, by storing indoors, in original packaging until installation.
• Remove pallet straps once load is moved to storage area.
• Store panels flat, on a smooth, dry surface—ensure there are no bends or bowing in the load.
• Reseal protective wrap if partial load is used.
• Clear Peel Coat on Exterior Panels
• Peel Coat is intended to protect the surface of panels during transportation and fabrication.
• Peel Coat is not intended for long term storage.
• Hot/cold temperatures may affect removal of the Peel Coat.
• IMPORTANT: Remove Peel Coat PRIOR to vacating installation premises.

Single-sided Panels

Panels are NOT identical on both sides. The Front Side faces outward (away from the building) and has the removable Peel Coat. Installers are responsible for ensuring the Front Side is visible and for removing the peel coat PRIOR to vacating the premises.

Do Not store panels on edges or uneven surfaces. Do Not let panels slip or slide into each other. Do Not store directly on concrete floors as moisture may migrate. Do Not store under heating or air conditioning units. Damage resulting from improper storage or handling will void the warranty.